The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, different oil discharge holes can be opened or closed. The oil inlet hole is usually open, and hydraulic oil will enter different oil discharge pipes, and then push the piston of the oil cylinder through the pressure of the oil, The piston drives the piston rod, which drives the mechanical device. In this way, mechanical motion is controlled by controlling the current flow of the electromagnet.
Item NO.:
XUVAL33-245Lead Time:
30 DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTMOQ:
1Features:
1. Direct piston structure
2. The opening pressure is 0 and the flow rate is high
3. Suitable for low-voltage systems
Medium: steam, hot water, oil, etc
Fluid temperature: PTFE: -10℃~180℃
Graphite: -10℃~300℃
Pressure: 0.05Mpa~1.6Mpa
Thread: G thread, NPT thread, flange
Voltage: DC-12V, 24V
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz
Range:±10%
Coil: Y21B, 18VA (AV), 16W (DC), IP65100% ED
Y51B, 70VA (AV), 50W (DC), IP65100% ED
Electromagnetic valve faults and troubleshooting methods | ||
The solenoid valve does not work when energized | Check for poor power wiring | Reconnect the wires and connectors |
Check if the power supply voltage is working ± operating range | Adjust to the normal position range | |
Is the coil soldered off | Rewelding | |
Coil short circuit | Replace the coil | |
Is the working pressure difference inappropriate | Adjust the pressure difference or replace the proportional solenoid valve | |
High liquid temperature | Replace the appropriate solenoid valve | |
There are impurities that cause the main valve core and moving iron core of the solenoid valve to become stuck | Clean and replace the seal and install the filter if there is any damage to the seal | |
The viscosity of the liquid is too high, the frequency is too high, and the lifespan has reached |
Replace the product |
Previous :
Stainless steel solenoid valvenext :
Two way solenoid valveIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported