Bend pipes are bent using a complete set of bending molds, which are divided into two processes: cold bending and hot pushing. Regardless of the type of machine equipment and pipeline, most of them use bent pipes, mainly for oil, gas, infusion, and other purposes. Classification: According to the production method, it can be divided into pushing, p1
The PZ673H pneumatic knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of paper slurry, material water mi1
The H44J/Fs rubber lined fluorine lined swing check valve adopts a lining process where the medium can reach. The lining material is made of fluoroplastics such as F46 and F3, which can withstand corrosive media other than molten alkali metals and elemental fluorine. It is suitable for pipelines with concentrations of sulfuric acid, hydrochloric ac1
The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, diffe1
This series of diaphragm valves can be applied to different fluid medium pipelines at different temperatures based on different coating materials, serving as an opening and closing mechanism to control medium flow.
Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long no1
The PZ273H electro-hydraulic knife type gate valve controls the opening and closing of the valve through the reciprocating push position of the electro-hydraulic linkage device. If equipped with sensors or digital display devices, it can be centrally or programmatically controlled in remote and high-altitude hazardous areas. It is widely used in in1
Product features and uses: Adopting a three-stage ball valve with a full bore design, it has a large flow capacity, low flow resistance, reduces wear, and extends the service life of the valve. The valve seat sealing pair adopts a hidden design to avoid direct damage caused by medium erosion. The valve is equipped with a high wear-resistant sheath 1