30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Electric cryogenic control valve
Overview of electric low temperature control valve: The electronic electric low-temperature control valve is composed of 3810 series electric actuator and extended-rod low-temperature valve body. The valve body adopts a precise structure and has good low-temperature resistance. It is suitable for low temperature and deep cold of medium temperature 1
-
Q671F pneumatic wafer ball valve
Overview of pneumatic wafer ball valve: Pneumatic wafer ball valve is mainly used in short pipelines and special space occasions. It is mainly composed of single (double) acting pneumatic actuator and ultra-thin ball valve. It is a new generation of ultra-short flanged ball valve.
-
Pneumatic flange three-way ball valve
Product introduction: Pneumatic three-way flange ball valve can be divided into L type and T type. The L-type three-way ball valve is used to switch the flow direction of the medium, which can connect two channels that are perpendicular to each other. Three-way ball valves generally adopt a two-seat structure, but can also adopt a four-seat structu1
-
Pneumatic internal thread three-way ball valve
Product description: Pneumatic three-way internal threaded ball valve is a new type of three-way switching regulating/cutting valve developed by integrating advanced technologies at home and abroad. The standard ball core has an L-shaped three-way double channel, which can change the relative angle between the ball core and the pipeline to achieve 1
-
Water seal gate valve
Product introduction: Water seal gate valve is suitable for opening and closing devices on pipelines with nominal pressure of 100MPa, working temperature of 425°C, and working medium of water, steam, oil and non-corrosive gas. It is especially suitable for steam turbine vacuum condensing systems in thermal power plants.
-
Electric flange ball valve
Product introduction: It is suitable for two-position cut-off and flow adjustment occasions. The connection between the ball valve and the electric actuator adopts a direct connection method. The electric actuator has a built-in servo system.
-
ZJSF/H pneumatic film three-way regulating valve
Introduction of ZJSF/H pneumatic film three-way regulating valve: The ZJSF(H) pneumatic film three-way split (combined) flow regulating valve adopts a double valve core up and down guide structure, equipped with a pneumatic actuator or an electric actuator. The valve body is a three-way structure, that is, one inlet and two outlets (split type). Tw1
-
Z940H/Y electric medium pressure flange connection gate valve
Product overview of Z940H/Y electric high temperature and high pressure gate valve: The Z940H/Y electric high temperature and high pressure gate valve is suitable for the pipelines of various systems in petroleum, chemical, hydraulic, and thermal power plants with a nominal pressure of PN1.6~16.0MPa and working temperature ≤-29℃~550℃ to cut off or 1
-
PSRQ661F pneumatic butt welding ball valve
Product introduction: The PSRQ661F pneumatic three-piece butt-welded ball valve is powered by compressed air. The valve stem drives the valve core to rotate 90° in the valve body to realize the function of valve reversal and one in, two out or two in and one out. The sealing performance of this product is divided into metal sealing and soft sealing1