English
Product introduction: Pneumatic three-way flange ball valve can be divided into L type and T type. The L-type three-way ball valve is used to switch the flow direction of the medium, which can connect two channels that are perpendicular to each other. Three-way ball valves generally adopt a two-seat structure, but can also adopt a four-seat structure.
Item NO.:
XUVAL77-89Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
SilveryMOQ:
10Pneumatic flange three-way ball valve
The four-seat sealed three-way ball valve has beautiful appearance, compact and reasonable structure. It can not only switch the flow direction of the medium, but also make the three channels communicate with each other. At the same time, it can also close any channel to connect the other two channels for flexible control. Confluence or divergence of media in the pipeline.
Features:
1. The pneumatic three-way flanged ball valve adopts an integrated structure in structure, a sealing type of four-sided valve seat, fewer flange connections, high reliability, and a lightweight design.
2. Pneumatic three-way ball core is divided into T type and L type, with long service life, large flow capacity and low resistance.
3. The ball valve is divided into two types: single-acting and double-acting according to the action type. The feature of the single-acting type is that once the power source fails, the ball valve will be in the state required by the control system.
Technical parameter:
Body form
Three-way ball valve
Nominal diameter
DN15~DN200mm
Nominal pressure
National standard PN1.6, 2.5, 4.0, 6.4 MPa; American standard ANSI 150, 300LB; Japanese standard JIS 10, 20, 30K
Flange standard
JIS, ANSI, GB, JB, HG, etc.
Connection Type
Flange type, thread type (suitable for 1/2"～2")
Bonnet form
Integral
Gland form
Pressure plate compression type
Seal packing
V-type PTFE packing, impregnated PTFE packing, asbestos woven packing, flexible graphite
Executive agency:
Actuator type
GT, SR, ST, AT, AW series single and double acting pneumatic actuators
Air pressure
0.4~0.7Mpa
Air source interface
G1/4"、G1/8"、G3/8"、G1/2"
Ambient temperature
20~+60℃
Action form
Single-acting actuator: air-to-close type (B)-valve position open when air is lost (FO); air-to-open type (K)-valve position closed when air is lost (FC)
Double-acting actuators: air-to-close type (B)-valve position retention (FL) when air is lost; air-open type (K)-valve position retention (FL) when air is lost
Appendix
Positioner, solenoid valve, air filter pressure reducer, retaining valve, travel switch, valve position transmitter, handwheel mechanism, etc.
The main shape and connection dimension unit of three-way flange ball valve (mm):
Nominal diameter
L
D1
D2
H
N-∅M
DN
in
15
1/2
130
15
46
48
4-14
20
3/4
130
20
56
53
4-14
25
1
140
25
65
58
4-14
30
1-1/4
165
32
76
71
4-18
40
1-1/2
165
40
84
76
4-18
50
2
203
50
99
85
4-18
65
2-1/2
222
64
118
101.5
4-18
80
3
241
76
132
111.5
8-18
100
4
305
100
156
140
8-18
125
5
356
125
184
183
8-18
150
6
394
150
211
201
8-22
200
8
457
200
266
252
8-22
Product Structure:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
SPECIFICATIONS: DESIGN AND MANUFACTURE (FULL PORT), FACE TO FACE:DIN3202 15～100 （SerIes F4）125 above（SerIes F5), FLANGE:DIN 2501/DIN2533, PRESSURE TEST:ISO5208 or API598, FLANGE FACINGS AVAILABLE ON REQUEST
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball (called a "floating ball") to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.[1] The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status
Stainless Steel Thread Ball Valve includes 1000WOG CF8M Ball Valve,Floating Ball Valve 2000WOG, Butt Welding Ball Valve, Socket Welded Floating Ball Valve, Extended Welding SS Ball Valve, Three Piece Union Welded Ball Valve, Clamped Ends Stainless Steel Ball Valve, Floating NPT CF8M Ball Valve with ISO5211 Mounting Pad, Stainless Steel Ball Valve with Pneumatic Actuator or Electric Actuator.
Flanged Ball Valve includes 1PC Stainless Steel Flange Ball Valve, 1PC Carbon Steel Flanged Ball Valve, 1PC API/DIN Flanged Ball Valve, 2PC API Flanged Stainless Steel Ball Valve, Two Piece DIN F4/F5 Flanged Ball Valve, 2 Piece JIS 10K Full Port Flanged Ball Valve, 2PC Floating Flanged Ball Valve with ISO5211 Direct Mounting Pad, 2PC CF8M/WCB Flanged Ball Valve, 3PC API/DIN standard Flanged Ball Valve, 3PC Stainless Steel Floating Flanged Ball Valve, Three Piece CF8M 150LB Flanged Ball Valve, 3 Piece Full Port PN16/40 Flanged Ball Valve
Wafer Type Stainless Steel Ball Valve can manufacture in API, DIN & JIS standards, pressure range 150LB,300LB, PN16/PN40, 10K/20K. Mainly materials are A351 CF8/CF8M/CF3/CF3M, A216 WCB, A105, F11, F22, F51,F91, etc. Operated with handle or handle with locking device for option.
2PC Stainless Steel Thread Ball Valve includes 2PC 1000WOG CF8M Ball Valve,2PC Floating Ball Valve 2000WOG, 2PC Butt Welding Ball Valve, 2 Piece Socket Welded Floating Ball Valve, 2PC Extended Welding SS Ball Valve, Three Piece Union Welded Ball Valve, 2PC Clamped Ends Stainless Steel Ball Valve, 2PC Floating NPT CF8M Ball Valve with ISO5211Direct Mounting Pad, 2PC Stainless Steel Ball Valve with Pneumatic Actuator or Electric Actuator.
3/4 Way ball valve has T type,L type and X type. T type can make three orthogonal pipes connect with each other and cut off the third channel, and play the role of shunt and confluence. L type way ball valve type can only connect two pipes with each other orthogonal, can not keep the third pipe interconnected at the same time, only play the role of distribution.
A piece of internal thread ball valve and flange ball valve is the same type of valve, the difference in its close is a ball, the ball around the center line of the body for rotation to open, close a valve.The ball valve in the pipeline is mainly used to cut off, distribution and change the flow direction of the medium.Wide ball valve is a new type of valve widely used in recent years.
A piece of ball valve and flange gate valve are the same type of valve, the difference is that its closure is a ball, the ball rotates around the center line of the valve body to achieve the opening and closing of a valve. Ball valve is mainly used to cut off, distribute and change the flow direction of medium in pipeline. Wide ball valve is a new type of valve widely used.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
NO.139,Xianghe Road,Fangbu Industrial Zone,Tonglu,Hangzhou,China
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported
