Gate Valve opens shuts is the damper plate, the damper plate heading and the fluid direction is vertical, the gate valve only can do all starts with the entire pass, cannot make the adjustment and the throttle. The damper plate has two packing surfaces, but the most commonly used pattern gate valve two packing surfaces form, the wedge-shaped angle 1
XUVALdouble sphere rubber expansion joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces. XUVAL double sphere rubber expansion joints are inherently stronger than the conventional h1
XUVAL Flexible rubber elbow ferred to as rubber elbow, is composed of fabric reinforced rubber parts and flat joints, loose sleeve metal flange or threaded pipe flange, used for pipe vibration isolation and noise reduction, compensation of displacement elbow.
JIS 10K Globe valve also known as the door valve, belongs to the forced sealing valve, so when the valve is closed, must apply pressure to the disc, in order to force the sealing surface leakage.When the medium under the disc into the valve, the operating force to overcome the resistance, is the friction of the valve stem and packing and by the pre1
VSSJAFC type detachable double flange force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transfer the pressure thrust of the connected parts (blind plate force) and compensate for pipeline error, and cannot absorb axial displacement.Important for pump, valve1
The double flange limit expansion joint is composed of main parts such as body, sealing ring, gland and extension shortening pipe.On the basis of the original performance of the loose sleeve expansion joint, a limit device was added, and the maximum expansion was locked with a double nut.The pipe can expand and contract freely in the allowed expans1
Flange check valve is to rely on the flow of the medium itself and automatically open, close disc, used to prevent the medium backflow valve, also known as the check valve, one-way valve, reverse flow valve, and back pressure valve.
The opening and closing parts of the stainless steel flange globe valve are plug shaped disc, sealing surface is flat or conical surface, disc along the center line of the seat for linear motion.Stem movement, (common name: dark stem), also can be up and down rotary stem type, (common name: rising stem) globe valve refers to the closing member (dis1
Three biased multi-level metals hard seal butterfly valve series,is the long life which the our company newly develops,the energy conservation butterfly valve.