Fluorine-lined Y-type filter product overview: The fluorine-lined Y-type filter is basically the same as the commonly used Y-type filter in structure, appearance and function. It can be used in almost all mediums such as strong acids, strong bases, salts, strong oxidants and organic solvents. Fluorine-lined Y-type filters are widely used in various corrosive pipelines to remove impurities in corrosive media and protect the normal operation of pumps, valves and other equipment. When the corrosive fluid passes through the filter screen, solid impurity particles It is blocked in the filter screen, and the clean medium passes through the filter screen and enters the instruments, valves, machinery and equipment at the back end of the filter so that it can work and operate normally, achieve stable process requirements, and ensure the role of safe production.
Item NO.:
XUVAL77-122Lead Time:
45DaysProduct Orgin:
CHINABrand:
XUVALShipping Port:
ShanghaiPayment:
100%TTColor:
BlueMOQ:
10GL41F46 fluorine-lined filter
The fluorine-lined Y-type filter is an indispensable filter device for the pipeline system that conveys the medium. One end is to allow fluids such as water to pass through, and the other end is to precipitate waste and impurities. Usually it is installed in the pressure reducing valve, pressure relief valve, fixed The inlet end of the water level valve or other equipment, its function is to remove impurities in the water to protect the normal operation of the valve and equipment.
The Y-type filter is usually installed at the inlet end of the pressure reducing valve, pressure relief valve, positioning water level valve or other equipment to remove impurities in the medium to protect the normal use of the valve and equipment. The Y-type filter has the characteristics of advanced structure, small resistance and convenient sewage discharge. The suitable medium of Y-type filter can be water, oil and gas. Generally, the water network is 18-30 mesh, the ventilation network is 10-100 mesh, and the oil-passing network is 100-480 mesh.
Material table of main parts and components of Y-type filter lined with PTFE:
Serial number
Part Name
Material name
1
Shell
HT250
WCB
CF8
CF3
CF8M
CF3M
2
Flange cover
HT250
WCB
CF8
CF3
CF8M
CF3M
3
Filter
PTFE/F4 (polytetrafluoroethylene), FEP/F46 (polyperfluoroethylene propylene)
4
Bolt
35
35
1Cr17Ni2
1Cr18Ni9
1Cr17Ni2
1Cr18Ni9
5
Nut
45
45
0Cr18Ni9
0Cr18Ni9
0Cr18Ni9
0Cr18Ni9
6
Lining layer
FEP/F46 (polyperfluoroethylene propylene), PCTFE/F3 (polychlorotrifluoroethylene), PTFE/F4 (polytetrafluoroethylene), PO (polyolefin)
Main performance parameters of PTFE-lined Y-type filter:
Nominal pressure PN (MPa)
0.6
1.0
1.6
2.5
2.0
Shell test pressure (MPa)
0.9
1.5
2.4
3.75
3.0
High pressure liquid seal test pressure (MPa)
0.66
1.1
1.76
2.75
2.2
Low pressure gas seal test pressure (MPa)
0.6
0.6
0.6
0.6
0.6
Filtration accuracy
10-100 mesh
Flange standard
GB/T 17241.6-2008, GB/T 9112-2010, HG/T 20592-2009, HG/T 20615-2009, etc.
The main dimensions of the Y-type filter lined with PTFE:
Dimensions (mm)
L
H
25
165
135
32
185
154
40
200
164
50
230
182
65
295
205
80
315
232
100
355
263
125
405
370
150
480
425
200
605
530
250
735
-
Product Structure:
Packing & Delivery :
Packing Details:all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details:Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not
enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
Previous :
Filter lining PTFEnext :
SJSY pull rod telescopic filterIf you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
New Products
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported