30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Cast iron 2 piece flanged ball valve
SPECIFICATIONS: DESIGN AND MANUFACTURE (FULL PORT), FACE TO FACE:DIN3202 15~100 (SerIes F4)125 above(SerIes F5), FLANGE:DIN 2501/DIN2533, PRESSURE TEST:ISO5208 or API598, FLANGE FACINGS AVAILABLE ON REQUEST
-
Cast iron Flanged Foot Valve PN16
The bottom valve,also known as the reverse stop valve, is a low-pressure plate valve, whose function is to ensure the single flow of liquid in the suction pipe, so that the pump works normally when the pump stops working for a short time, so that the liquid can not return to the water tank, and the suction pipe is filled with liquid to facilitate t1
-
Gate valve flange end JIS10K 20K
Gate Valve opens shuts is the damper plate, the damper plate heading and the fluid direction is vertical, the gate valve only can do all starts with the entire pass, cannot make the adjustment and the throttle. The damper plate has two packing surfaces, but the most commonly used pattern gate valve two packing surfaces form, the wedge-shaped angle 1
-
JGD B Threaded Rubber Joint
The product is composed of rubber double ball vulcanized and metal parallel flexible joint with inner layer, reinforcement layer and outer rubber layer composite model.It is characterized by high pressure resistance, good elasticity, large displacement and deformation, good shock absorption and noise reduction effect, flexible installation, and lon1
-
VSSJA-2(B2F) Double Flange Limited Expansion Joint
The double flange limit expansion joint is composed of main parts such as body, sealing ring, gland and extension shortening pipe.On the basis of the original performance of the loose sleeve expansion joint, a limit device was added, and the maximum expansion was locked with a double nut.The pipe can expand and contract freely in the allowed expans1
-
H42 Vertical lift flanged check valve
Flange check valve is to rely on the flow of the medium itself and automatically open, close disc, used to prevent the medium backflow valve, also known as the check valve, one-way valve, reverse flow valve, and back pressure valve.
-
-
ANSI 150LB 300LB stainless steel flanged plug valve
The plug valve, the opening and closing part (conical plug or ball) rotates around its center line. The plug valve USES the plug body with a through hole as the opening and closing part, and realizes the opening and closing action through the rotation of the plug body and the valve stem.
-