Electric ball valves are important actuators in industrial automation control systems. Electric ball valves are valves that rotate around the axis of the valve stem based on the movement of the valve disc. The change in the valve seat opening is directly proportional to the valve disc stroke. It is mainly used to cut off or connect the medium in pi1
A three-way fitting is a type of pipeline connector used at the branch of the main pipeline, which can be divided into equal diameter and reduced diameter. Tee fittings are used in areas where pipelines have branches, and due to their convenience and simplicity, they are widely used in fields such as chemical engineering, civil construction, mechan1
Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone 1
Cast steel electric ball valves are suitable for two-position cut-off and adjustment situations. The connection between the valve and the actuator adopts a direct connection method. The electric actuator is equipped with a built-in servo system, without the need for an additional servo amplifier. The operation can be controlled by inputting a 4-20m1
D63H, D363H, D663H, and D963H PN10~PN100 three eccentric welded hard seal electric butterfly valves use precision J-shaped elastic sealing rings and three eccentric multi-level metal hard sealing structures. They are widely used in industrial pipelines with medium temperatures ≤ 400 ℃, such as metallurgy, power, petrochemical, water supply and drai1
The Q947F electric fixed ball valve has low torque, small seat deformation, stable sealing performance, and long service life, making it suitable for high-pressure and large-diameter applications. Nominal diameter: DN15-DN1000 Nominal pressure: 1.0MPa-100MPa Medium temperature: -20 ℃ -250 ℃ Function options: switch, adjustment, high-temperature typ1
In pipeline systems, elbows are fittings that change the direction of the pipeline. According to angles, there are three most commonly used types: 45 ° and 90 ° and 180 °. In addition, according to engineering needs, there are also other abnormal angle elbows such as 60 °. The materials of elbows include cast iron, stainless steel, alloy steel, mal1
Equal diameter cross, commonly referred to as a professional term, refers to pipe fittings and pipeline connectors, used in main pipelines where branch pipes are required. Equal diameter cross is a type of cross, which can be divided into two types: general equal diameter cross and differential diameter cross. Named because the four ends can be con1
The J61Y and J61H forged steel globe valve series products are not only suitable for medium and low pressure, but also for high pressure. They play a role in cutting off or connecting regulating pipelines in various operating conditions such as petroleum, chemical, pharmaceutical, fertilizer, and power industries.