The HQ41X ball type ball check valve adopts a rubber wrapped ball as the valve disc. Under the action of the medium, it can roll up, down, left and right on the integral slide inside the valve body to open or close the valve. Silent closure, no water hammer generated, good sealing performance. The valve body adopts a full water flow channel, with h1
Product Introduction: 1、 Product Description: Product Model: Q347F/H/Y Product Name: Q347 Fixed Worm Gear Ball Valve Split and Three Section Fixed Ball Valves, also known as Side Mount Split Ball Valves, divide the valve body into asymmetrical sections along the axis perpendicular to the valve channel
Application scope: Double disc swing clamp check valves are suitable for nominal pressures of PN10 to PN420 and Class150 to Class2500; Nominal diameter DN15~DN1200, NPS1/2~48; Used on various pipelines with working temperatures ranging from -196 ℃ to 540 ℃ to prevent medium backflow. By selecting different materials, the clamp type check valve can 1
High pressure butt welded ball valves have strong adaptability to pressure and temperature changes due to the valve seat being composed of carbon fiber reinforced Teflon sealing rings and disc springs, and will not produce any leakage within the marked pressure and temperature range. The machining process of the sphere is tracked and detected by ad1
The electric single seat regulating valve is composed of a series of electronic electric actuators (intelligent integrated actuators) such as 3810L/PSL and a single seat regulating valve. The electronic electric actuator is equipped with a built-in servo system, without the need for an additional servo amplifier. It can be controlled for operation 1
Product Overview: One is a two-piece structure, with threaded connections in the middle and sealed with PTFE gaskets; Another type is a three piece structure, with bolts in the middle. Depending on the selected valve seat and gasket/packing material, it can adapt to different working temperatures and media. The product is mainly suitable for variou1
Compared with traditional ball valves, track ball valves, whether floating or fixed, always have contact between the ball and the valve seat, resulting in high switching torque and easy damage to the sealing surface. When the red valve track ball valve is opened and closed, the ball first deflects -8 degrees and then rotates. During the entire open1
operational principle: Stainless steel pneumatic ball valves have evolved from globe valves. It has the same 90 degree rotation lifting action, but the difference is that the plug body is a sphere with a circular through-hole or channel passing through its axis. The ratio between the sphere and the channel should be such that when the sphere rotate1