High pressure boiler pipes are used for heating surface pipes of low and medium pressure boilers (with a working pressure generally not exceeding 5.88Mpa and a working temperature below 450 ℃); Used for heating surface pipes, economizers, superheaters, reheaters, petrochemical industry pipes, etc. of high-pressure boilers (with working pressure gen1
Magnetic drive centrifugal pump (referred to as magnetic pump) is a new type of pump that applies modern magnetic mechanics principles and utilizes the magnetic transmission of permanent magnets to achieve contactless transmission of torque. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic force lin1
Bend pipes are bent using a complete set of bending molds, which are divided into two processes: cold bending and hot pushing. Regardless of the type of machine equipment and pipeline, most of them use bent pipes, mainly for oil, gas, infusion, and other purposes. Classification: According to the production method, it can be divided into pushing, p1
A41H type are used for the equipment and pipeline of the petroleum gas, air, water etcmedium what the working temperature are less than 300C A41Y-P/R type are used for theequipment and pipeline of the quality with corrode medium what the working temperature areess than 200C Take for extra pressure devices. Flange connecting dimensions o1
The PZ673H pneumatic knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of paper slurry, material water mi1
The ZSJZ series water flow indicator is used for automatic sprinkler water extinguishing systems. It can be installed on the main water supply pipe or branch pipe to provide an electrical signal of water flow in a certain area. This electrical signal can be sent to the electric control box or used to start the control switch of the fire pump. The w1
The H44J/Fs rubber lined fluorine lined swing check valve adopts a lining process where the medium can reach. The lining material is made of fluoroplastics such as F46 and F3, which can withstand corrosive media other than molten alkali metals and elemental fluorine. It is suitable for pipelines with concentrations of sulfuric acid, hydrochloric ac1
The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, diffe1
This series of diaphragm valves can be applied to different fluid medium pipelines at different temperatures based on different coating materials, serving as an opening and closing mechanism to control medium flow.