30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Stainless steel corrosion-resistant centrifugal pump
The H-type stainless steel chemical centrifugal pump is a single stage single suction cantilever centrifugal pump, marked with the rated performance point and size according to the international standard 1S02858-1975 (E). It is an energy-saving product used to replace the F-type corrosion-resistant pump. This series of chemical centrifugal pumps is1
-
Tee carbon steel pipe fittings
A three-way fitting is a type of pipeline connector used at the branch of the main pipeline, which can be divided into equal diameter and reduced diameter. Tee fittings are used in areas where pipelines have branches, and due to their convenience and simplicity, they are widely used in fields such as chemical engineering, civil construction, mechan1
-
Flange steam pressure reducing valve
This series of pressure reducing valves belongs to the pilot piston pressure reducing valve. It consists of two parts: the main valve and the pilot valve. The main valve is mainly composed of valve seat, disc, piston, cylinder liner, and spring parts. The pilot valve mainly consists of valve seat, valve disc diaphragm, spring, adjustment spring, an1
-
Flat welding flange with neck
Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone 1
-
Cast steel steam trap valve
CS41H-16, CS41H-16C, CS41-25, CS41-40 free floating ball steam trap: flange connection, floating ball structure, valve seat sealing surface material is Cr13 series stainless steel, nominal pressure PN16~PN40, valve body material is cast iron (CS41H-16), carbon steel (CS41H-16C, CS41-25, CS41-40) steam trap. Used for steam heating equipment, steam p1
-
Q947H-40C-300 Flange Ball Valve
Cast steel electric ball valves are suitable for two-position cut-off and adjustment situations. The connection between the valve and the actuator adopts a direct connection method. The electric actuator is equipped with a built-in servo system, without the need for an additional servo amplifier. The operation can be controlled by inputting a 4-20m1
-
PZ973H Electric Knife Gate Valve
Product Usage The PZ973H electric knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of pulp, feed water m1
-
Self operated pressure regulating valve body
The ZZY type self operated pressure regulating valve does not require external energy, uses the energy of the regulated medium as the power source, introduces an actuator to control the position of the valve core, changes the pressure difference and flow rate at both ends, and stabilizes the pressure before (or after) the valve. It has the advantag1
-
Self operated pressure regulating valve
Product Overview: The self operated pressure regulating valve does not require external energy, and uses the energy of the regulated medium as the power source to introduce an actuator to control the position of the valve core, change the pressure difference and flow rate at both ends, and stabilize the pressure before (or after) the valve. It has 1