The newly developed DBY type electric diaphragm pump is driven by XLD series cycloidal pinwheel reducer. The electric diaphragm pump is a new type of pump. In recent years, due to the breakthrough in diaphragm material, more and more industrialized countries in the world have adopted this type of pump, replacing some centrifugal pumps and Screw pum1
Fluorine lined pneumatic diaphragm regulating valve (ZMATF-10K) Pneumatic diphragm control valve (ZMATF-10K) The ZMATF (pneumatic open) pneumatic diaphragm regulating valve and ZMBTF (pneumatic close) pneumatic diaphragm regulating valve are composed of a multi spring pneumatic diaphragm actuator and a diaphragm valve. The diaphragm valve body has 1
The elbow is a kind of pipe fitting used at the turn of the pipeline. Among all the pipe fittings used in the piping system, the proportion is relatively large, about 80%. Generally, different forming processes are selected for elbows of different materials or wall thickness. The commonly used seamless elbow forming processes in manufacturing plant1
Tubing is mainly used to connect drill collars and drill bits and transmit drilling power; A casing is a steel pipe used to support the walls of oil and gas wells, ensuring the normal operation of the entire well during the drilling process and after completion.
High pressure boiler pipes are used for heating surface pipes of low and medium pressure boilers (with a working pressure generally not exceeding 5.88Mpa and a working temperature below 450 ℃); Used for heating surface pipes, economizers, superheaters, reheaters, petrochemical industry pipes, etc. of high-pressure boilers (with working pressure gen1
Magnetic drive centrifugal pump (referred to as magnetic pump) is a new type of pump that applies modern magnetic mechanics principles and utilizes the magnetic transmission of permanent magnets to achieve contactless transmission of torque. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic force lin1
The PZ673H pneumatic knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of paper slurry, material water mi1
The H44J/Fs rubber lined fluorine lined swing check valve adopts a lining process where the medium can reach. The lining material is made of fluoroplastics such as F46 and F3, which can withstand corrosive media other than molten alkali metals and elemental fluorine. It is suitable for pipelines with concentrations of sulfuric acid, hydrochloric ac1
The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, diffe1