The small hole floating ball valve has the function of automatically opening and closing pipelines to control water level. This valve is made of high-quality copper material, with a small size and easy installation, high sensitivity for use, low head loss, and no water hammer phenomenon. It can greatly improve the utilization rate of the water tower (pool). For new water towers (pools), due to the...
Steam trap is an automatic valve used in steam heating equipment, steam transmission pipelines, and steam usage devices. Quickly discharge the condensed water generated by steam work from the device, prevent fresh steam leakage, and maintain the efficiency of the device at its optimal state. No form or type of steam trap is omnipotent. In order to select and install the ideal steam trap, considera...
Ball valve structure There are many types of structures for ball valves, but they are basically the same. They are all round ball cores with opening and closing parts, mainly composed of valve seats, balls, sealing rings, valve stems, and other driving devices. The valve can be opened and closed by rotating the valve stem 90 degrees. They are used in pipelines to shut off, distribute, regulate flo...
Compared with other types of valves, pneumatic ball valves have advantages such as angular stroke output torque, fast opening speed, stability and reliability, and wide application: 1. The thrust bearing reduces the Friction torque of the valve stem, which can make the valve stem run smoothly and flexibly for a long time. 2. Anti static function: There is a spring installed between the ball, valve...
There are many types of valve, each has its own advantages and disadvantages, advantages and disadvantages are listed below small make up the five valves, including gate valve, butterfly valve, ball valve, globe valve and plug valve, hope will be helpful to you. Gate valves Gate valve is closed parts (ram) along the channel axis vertical direction valve, mainly for cut off the medium in the pipe o...
Classification Divided by power Automatic valve: A valve that operates by relying on the force of the medium itself. Such as check valves, pressure reducing valves, drain valves, safety valves, etc. Drive valve: a valve that relies on external forces such as manpower, electricity, fluid power, and pneumatic power to operate. Such as globe valves, throttle valves, gate valves, butterfly valves, bal...
Shut-off valve Also known as a shut-off valve, it belongs to the forced sealing type valve and is a type of shut-off valve. There are three types of connection methods: flange connection, screw connection, and welding connection. The "three modernizations" of valves in our country once stipulated that the flow direction of shut-off valves should be from top to bottom, so there is directional insta...
1、 Structure and characteristics of one piece ball valve One piece ball valve is called a one piece ball valve because the valve body adopts an integral structure. Its appearance is small and its weight is light. The ball core, valve seat, and valve stem are installed from the flow channel on one side of the valve body. Due to limitations in the flow channel size of the valve body, the full ...
Before purchasing a water pump, many users believe that choosing a higher head water pump for a lower head operating condition has a wider range of head usage. In this misleading misconception, when purchasing a water pump, the pump head chosen is very high. In fact, for centrifugal pumps, when the pump model is determined, its power consumption is directly proportional to the actual pump and flow...
Categories
Recent Posts
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported