• Jul , 13 2023

The small hole floating ball valve has the function of automatically opening and closing pipelines to control water level. This valve is made of high-quality copper material, with a small size and easy installation, high sensitivity for use, low head loss, and no water hammer phenomenon. It can greatly improve the utilization rate of the water tower (pool). For new water towers (pools), due to the...

• Jul , 20 2023

Six major causes of valve sealing surface damage： Due to the functions of sealing elements on the valve channel, such as cutting and connecting, adjusting and distributing, separating and mixing media, the sealing surface is often corroded, eroded, and worn by the media, making it highly susceptible to damage.There are two reasons for damage to the sealing surface: artificial damage and natural da...

• Jul , 24 2023

The regulating valve positioner is the main accessory of the pneumatic actuator, which is used in conjunction with the pneumatic actuator to improve the position accuracy of the valve, overcome the influence of stem friction and medium imbalance, and ensure that the valve is correctly positioned according to the signal from the regulator. Positioners are required in the following situations: 1. Wh...

• Jul , 24 2023

Ball valve structure There are many types of structures for ball valves, but they are basically the same. They are all round ball cores with opening and closing parts, mainly composed of valve seats, balls, sealing rings, valve stems, and other driving devices. The valve can be opened and closed by rotating the valve stem 90 degrees. They are used in pipelines to shut off, distribute, regulate flo...

• Jul , 24 2023

Regulating valve positioner is a major attachment of pneumatic actuators, and pneumatic actuators, is used to improve the position precision of the valve, to overcome the friction of valve stem and medium the influence of unbalanced force, to ensure that the valve according to the regulator to signal to achieve the correct positioning. The following cases, to match the locator: 1 high and medium p...

• Jul , 25 2023

Pneumatic valve is an actuator that uses compressed air to drive and operate the valve. Its opening and closing speed is relatively fast, and it is commonly used for quick two position cut-off. It can also be used to regulate flow. Due to its main reliance on air source for operation, it has high practicality in flammable and explosive situations, and can be used to control gases, liquids, oil pro...

• Jul , 25 2023

1. Pneumatic valve positioner ooster When the air capacity of the booster control valve is large or the pneumatic signal transmission distance is long, the use of the booster can improve the response speed. 6. Speed Controller Speed Controller is installed in the regulator signal and drive part between the device, so that the regulator signal delay. Can also be used to prevent water hammer phenome...

• Jul , 25 2023

Compared with other types of valves, pneumatic ball valves have advantages such as angular stroke output torque, fast opening speed, stability and reliability, and wide application： 1. The thrust bearing reduces the Friction torque of the valve stem, which can make the valve stem run smoothly and flexibly for a long time. 2. Anti static function: There is a spring installed between the ball, valve...

• Jul , 27 2023

Valves are the most common equipment in chemical enterprises. Installing valves may seem easy, but if not implemented according to relevant technologies, it can lead to safety accidents Taboo 1 Hydraulic test shall be carried out under Negative temperature during winter construction. Consequence: Due to the rapid freezing inside the pipe during the hydraulic test, the pipe freezes out. Measures: T...