30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Corrosion resistant magnetic pump
Magnetic drive centrifugal pump (referred to as magnetic pump) is a new type of pump that applies modern magnetic mechanics principles and utilizes the magnetic transmission of permanent magnets to achieve contactless transmission of torque. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic force lin1
-
Z47WF gas gate valve
Gas gate valve is a type of gate valve mainly used in gas, petroleum, natural gas, and other media. The Z47WF gas gate valve (leak free gas flat gate valve) is specifically designed for natural gas, liquid petroleum gas, oil products, etc. With its unique design, novel structure, and good sealing performance, it completely solves the problems of va1
-
PZ673 Pneumatic Knife Gate Valve
The PZ673H pneumatic knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of paper slurry, material water mi1
-
Pneumatic diaphragm valve
This series of diaphragm valves can be applied to different fluid medium pipelines at different temperatures based on different coating materials, serving as an opening and closing mechanism to control medium flow.
-
JM744X quick opening mud discharge valve
The quick opening sludge discharge valve is usually installed on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom. The valve is divided into two chambers by a reinforced nylon rubber diaphragm. It is operated by a pneumatic or hydraulic source as the actuator, and is controlled by an electric or man1
-
Z15W-16T (Z198) locking gate valve
A magnetic lock valve is a type of magnetic lock that relies on the force of magnetic force to control the opening and closing of the closing components inside the valve. It is generally used on valves with important, special positions and functions to prevent the valve from being opened or closed arbitrarily. No gaps, anti clogging, waterproof, an1
-
Flange iron non rising stem gate valve
Gate valve refers to a valve whose opening and closing body (valve plate) is driven by the valve stem to lift the sealing surface of the valve seat, which can connect or cut off the passage of fluid. When the valve is partially opened, eddy currents are generated on the back of the gate, which can easily cause erosion and vibration of the gate, and1
-
Flange non rising stem signal gate valve
Signal gate valves are often used in automatic sprinkler fire pipeline systems to monitor water supply management and can remotely indicate valve opening. Rising stem gate valves and attached opening indicating gate valves are also commonly used in fire protection systems. If the gate valve is installed at a higher position from the ground, the ris1
-
Bellow Sealed Globe Valve
This product is suitable for the opening, circulation, and cut-off of pipeline fluids. The suitable medium is non corrosive fluids such as water, steam, and oil. The operating temperature is -30-300 degrees Celsius.