30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Q41F Soft Seal Ball Valve
The Q41F soft sealed ball valve not only has a simple structure and good sealing performance, but also has a small volume, light weight, low material consumption, small installation size within a certain nominal diameter range. It also has a small driving torque, simple operation, and is easy to achieve fast opening and closing. It is one of the fa1
-
High wear-resistant ball valve
Product features and uses: Adopting a three-stage ball valve with a full bore design, it has a large flow capacity, low flow resistance, reduces wear, and extends the service life of the valve. The valve seat sealing pair adopts a hidden design to avoid direct damage caused by medium erosion. The valve is equipped with a high wear-resistant sheath 1
-
PZ273H electro-hydraulic knife type gate valve
The PZ273H electro-hydraulic knife type gate valve controls the opening and closing of the valve through the reciprocating push position of the electro-hydraulic linkage device. If equipped with sensors or digital display devices, it can be centrally or programmatically controlled in remote and high-altitude hazardous areas. It is widely used in in1
-
FT44H lever floating ball steam trap valve
purpose Used for steam heating equipment and condensate recovery systems, as well as working conditions that require quick discharge of condensate, it can automatically, quickly, and continuously discharge condensate, effectively prevent steam leakage, and achieve the best heating effect.
-
Electric fluorine lined butterfly valve
Electric fluorine lined butterfly valve (also known as corrosion-resistant electric butterfly valve/electric PTFE lined butterfly valve) is composed of an electric actuator and a fluorine lined butterfly valve body. The butterfly valve uses a butterfly plate that rotates together with the valve stem as the opening and closing component to achieve t1
-
Stainless steel 45 ° elbow
Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long no1
-
Direct acting timed drainage solenoid valve
Features: 1. Direct pull diaphragm type. 2. Zero pressure start, suitable for low-pressure systems. Media: air, gas, water, etc Fluid temperature: nitrile rubber: -5 ℃~80 ℃ EPDM adhesive: -5 ℃~100 ℃ Fluorine rubber: -5 ℃~120 ℃ Pressure: 0.~1.0MPa Connection dimensions: 3/8 ", 1/2", 3/4 ", 1", 11/4 ", 11/2", 2 ", Thread: G thread, NPT thread Diamete1
-
QJ41M High Temperature Ball Valve
QJ41M high-temperature ball valve/QJ641M pneumatic high-temperature ball valve/QJ941M electric high-temperature ball valve is a ball valve that uses a new sealing material as the valve seat and is sealed with similar products such as polytetrafluoroethylene. Its service life has been increased by 3-5 times. High temperature ball valves have advanta1
-
H74H clamp check valve
H74H and H74X wafer type check valves are ultra-thin check valves that have the advantages of simple structure, beautiful appearance, light weight, and easy installation. It is mainly suitable for industrial sectors such as water supply systems, petroleum, chemical, and metallurgy, and is most suitable for places with installation space limitations1
-
Flanged double ring ball valve
1、 Electric actuator details Electric actuators are used to control valves and other similar products that rotate from 0 ° to 270 °, such as butterfly valves, ball valves, dampers, plug valves, louver valves, etc. They can be widely used in various industries such as petroleum, chemical, water treatment, shipbuilding, papermaking, power plants, hea1
-
Pneumatic three-way threaded ball valve
Design standard: MSS SP-110 Valve body wall thickness: ASMEB16.34 Inspection and Testing: MSS SP-110 Pipe threaded end: ASMEB1.20.1/DIN 2999/259/ISO 7/1, ISO 288/1/JIS B0203 Valve body materials: WCB, CF8, C8M, CF3M, 2205
-
Single clip LT handle butterfly valve
The difference between a single clip LT type center line butterfly valve and a double clip center line butterfly valve is that the flange around the valve body has threaded holes. This product can be used for clamp connections between pipelines, as well as for connections between pipeline ends, for emptying pipeline media. This product has good val1