Product introduction: Vacuum welding gate valve is a kind of mechanical equipment, which is suitable for pipelines with working temperature ≤ 425 ℃ and ≤ 550 ℃ and working medium of water, steam or air.
Overview of NKJ61H vacuum globe valve: The main body of this series of valves adopts casting and forging structure, with parallel double sealing pairs and semi-forced two-way sealing. The sealing surface moves in place and the wedge block moves step by step to achieve zero leakage. The sealing surface has low friction, easy opening and closing, and1
Characteristics of straight through diaphragm valves: The most prominent feature is that the diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, preventing the valve stem, valve disc, and other parts located above the diaphragm from medium corrosion, eliminating the packing sealing structure,1
Ansi b16.5 150lb American standard flange, also known as flange plate or flange plate. A flange is a component that connects pipes to each other and is connected to the end of the pipe; Also useful is the flange on the inlet and outlet of the equipment, used for the connection between two devices before. Flange connection or flange joint refers to 1
A three-way fitting is a type of pipeline connector used at the branch of the main pipeline, which can be divided into equal diameter and reduced diameter. Tee fittings are used in areas where pipelines have branches, and due to their convenience and simplicity, they are widely used in fields such as chemical engineering, civil construction, mechan1
The inverted bucket steam trap is a reliable, efficient, and energy-saving trap. The inverted bucket steam trap is based on the working principle of Density contrast between condensed water and steam, and its internal structure is connected to the inverted bucket by a lever system. The inverted bucket steam trap valve is usually used in systems tha1
Advantages: Necked flat welding flanges are also classified as flat welding flanges, as they have a short neck, which improves the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure official roads. Disadvantages: Compared to plate type flat welding flanges, they have a higher cost and are more prone 1