Water relief valve
A check valve, also known as a check valve, is an automatic valve that relies on the pressure of the flowing medium in the pipeline to push the valve disc to close and open the valve. When the medium stops flowing, the check valve disc closes, effectively preventing the medium from flowing back in the pipeline, which plays a significant role in ensuring the safety of the pipeline. Check valves can...
Plug valve, a valve that uses a plug body with a through hole as the opening and closing component. The plug body rotates with the valve stem to achieve opening and closing action. A small plug valve without packing is also known as a "cock". The plug body of the plug valve is mostly a conical body (also known as a cylinder), which forms a sealing pair in conjunction with the conical hole surface ...
The small hole floating ball valve has the function of automatically opening and closing pipelines to control water level. This valve is made of high-quality copper material, with a small size and easy installation, high sensitivity for use, low head loss, and no water hammer phenomenon. It can greatly improve the utilization rate of the water tower (pool). For new water towers (pools), due to the...
Six major causes of valve sealing surface damage: Due to the functions of sealing elements on the valve channel, such as cutting and connecting, adjusting and distributing, separating and mixing media, the sealing surface is often corroded, eroded, and worn by the media, making it highly susceptible to damage.There are two reasons for damage to the sealing surface: artificial damage and natural da...
The regulating valve positioner is the main accessory of the pneumatic actuator, which is used in conjunction with the pneumatic actuator to improve the position accuracy of the valve, overcome the influence of stem friction and medium imbalance, and ensure that the valve is correctly positioned according to the signal from the regulator. Positioners are required in the following situations: 1. Wh...
Ball valve structure There are many types of structures for ball valves, but they are basically the same. They are all round ball cores with opening and closing parts, mainly composed of valve seats, balls, sealing rings, valve stems, and other driving devices. The valve can be opened and closed by rotating the valve stem 90 degrees. They are used in pipelines to shut off, distribute, regulate flo...
Regulating valve positioner is a major attachment of pneumatic actuators, and pneumatic actuators, is used to improve the position precision of the valve, to overcome the friction of valve stem and medium the influence of unbalanced force, to ensure that the valve according to the regulator to signal to achieve the correct positioning. The following cases, to match the locator: 1 high and medium p...
Pneumatic valve is an actuator that uses compressed air to drive and operate the valve. Its opening and closing speed is relatively fast, and it is commonly used for quick two position cut-off. It can also be used to regulate flow. Due to its main reliance on air source for operation, it has high practicality in flammable and explosive situations, and can be used to control gases, liquids, oil pro...
1. Pneumatic valve positioner ooster When the air capacity of the booster control valve is large or the pneumatic signal transmission distance is long, the use of the booster can improve the response speed. 6. Speed Controller Speed Controller is installed in the regulator signal and drive part between the device, so that the regulator signal delay. Can also be used to prevent water hammer phenome...
Categories
Recent Posts
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported