Two eccentric valves
A butterfly valve is a shut-off valve with a relatively simple construction. In closed position, the disc blocks the valve bore as in open position, the disc is turned to allow flow. A quarter turn takes the valve from fully open to fully closed position, oppositely, the butterfly valve allows for quick opening and closure. Butterfly valves can be used for a broad range of applications within wate...
Check valves are automatic valves that open with forward flow and close with reverse flow. The pressure of the fluid passing through a system opens the valve, while any reversal of flow will close the valve. Exact operation will vary depending on the type of Check valve mechanism. Most common types of Check valves are swing, lift (piston and ball), butterfly, stop and tilting-disk. Types of Check ...
Ball valves A Ball valve is a quarter-turn rotational motion valve that uses a ball-shaped disk to stop or start flow. If the valve is opened, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. If the valve is closed, the ball is rotated so that the hole is perpendicular to the flow openings of the valve body and the flow is stopped. Types ...
Not only butterfly valve but also ball valve is one of our leading products.The biggest difference between the ball valve and butterfly valve is that the opening and closing parts of the butterfly valve is a plate, and the ball valve is a ball, the butterfly valve disc and the ball valve spool are around their own axis for rotation;The disc of gate valve is moved up and down along the axis;Butterf...
Heating pipes are usually used in boiler rooms, direct combustion engine rooms, and heating centers. Multiple heating pipes form a pipe network. The design pressure of hot water medium is less than or equal to 2.5MPa, and the design temperature is less than or equal to 200℃; the design pressure of steam medium is less than or equal to 1.6MPa, and the design temperature is less than or equal to 350...
Valves are control components in fluid conveying systems that have functions such as cutoff, regulation, diversion, prevention of reverse flow, pressure stabilization, diversion, or overflow pressure relief. According to different classification standards, there are various types of valves, and each valve has its own unique features. 1. By valve type Block valve: Block valve, also known as closed ...
Prohibit 1 Hydraulic test shall be carried out under Negative temperature during winter construction. Consequence: Due to the rapid freezing inside the pipe during the hydraulic test, the pipe freezes out. Measures: Try to conduct a water pressure test before winter construction, and after the test, blow the water clean, especially the water inside the valve must be removed completely, otherwise t...
Classification Divided by power Automatic valve: A valve that operates by relying on the force of the medium itself. Such as check valves, pressure reducing valves, drain valves, safety valves, etc. Drive valve: a valve that relies on external forces such as manpower, electricity, fluid power, and pneumatic power to operate. Such as globe valves, throttle valves, gate valves, butterfly valves, bal...
Shut-off valve Also known as a shut-off valve, it belongs to the forced sealing type valve and is a type of shut-off valve. There are three types of connection methods: flange connection, screw connection, and welding connection. The "three modernizations" of valves in our country once stipulated that the flow direction of shut-off valves should be from top to bottom, so there is directional insta...
Copyright © 2024 Tonglu Yongxin Valve Co.,Ltd.All Rights Reserved. Powered by dyyseo.com
IPv6 network supported