30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Floating ball valve
Product features: Ball valves use a ball with a circular through-hole as the opening and closing component. Under the drive of the valve stem, the ball rotates 0-90 ° around the center of the valve stem to complete the opening and closing function. They are small in size, light in weight, and have a simple structure. This series is a floating ball 1
-
Flat gate valve
Product features: The flat gate valve series products are high-performance valves designed and manufactured specifically for industries such as oil and gas long-distance pipelines, oil fields, Christmas trees, stations, airports, and refining. Complies with the relevant provisions of the American Petroleum Institute API 6D standard in terms of perf1
-
Silver single seat regulating valve
Product features: A single seat regulating valve is a type of regulating valve with a top guiding structure. The valve seat adopts a direct pressure non threaded connection, which is tightly sealed and easy to disassemble and maintain. The valve body structure is compact, the fluid channel is S-shaped, the pressure drop loss is small, the flow rate1
-
Nuclear power butterfly valve
Product features: Classified by nuclear safety level, it is divided into nuclear grade butterfly valves and non nuclear grade butterfly valves; The product is suitable for pipeline systems in nuclear power plants. Users can choose the appropriate butterfly valve type according to operating conditions. The product's function is to isolate and thrott1
-
Cage type regulating valve
Product features: The JMCB cage type regulating valve core is equipped with a high-performance sealing ring, effectively improving the leakage level, with a leakage level of IV. The fluid channel of the valve is S-streamlined, and there is also a guide wing installed on the valve body to improve the fluid balance flow around the sleeve. It has the 1
-
Pigging ball valve
Product features: Pigging ball valves are usually installed in groups, with one serving as the launcher and the other as the receiver. Pigging ball valves are directly installed at the launch and reception positions. A simpler method than traditional receiver and receiver devices or valve groups is to use a pigging ball valve, which only requires o1
-
High temperature regulated metal sealed butterfly valve
Features: Three-eccentric structure, open sealing and separation, close contact that is, seal. Floating sealing structure, the sealing ring can be appropriately adjusted with the closing thrust of the butterfly valve, which is suitable for various high and low temperature working conditions. Sealed with zero leakage.
-
0.5 seconds electro-hydraulic linkage to quickly close the butterfly valve
Features: It is suitable for the steam turbine system of the power plant, and when the unit has an accident, it can quickly shut down, effectively prevent the steam and condensate backflow of the steam extraction pipeline of the steam turbine, and instantly cut off the pipeline to protect the safety of the steam turbine; Activity test to prevent st1
-
RLD large diameter seawater resistant butterfly valve
Features: It is widely used in pipelines using seawater as a medium; The axial positioning structure solves the problem of partial crushing, wear and leakage of the upper and lower sealing surfaces caused by the axial channeling of the butterfly plate; The operating torque is small, light and labor-saving.
-
Rubber-sealed butterfly valve
Features: Double eccentric sealing structure, good sealing effect and long service life; The sealing ring is made of special rubber, which has high temperature resistance, good aging resistance and long service life; Sealed with zero leakage. Adjust the degree of compression of the sealing ring to achieve the best sealing effect.
-
J41H forged steel flange globe valve
41H forged steel flange globe valve refers to a valve in which the closing element (valve disc) moves along the centerline of the valve seat. According to the movement of the valve disc, the change in the valve seat opening is directly proportional to the stroke of the valve disc. Due to the relatively short opening or closing stroke of the valve s1
-
H41Y forged steel flange check valve
Structural Features: 1. The guide sleeve on the upper chamber of the valve body is made of stainless steel material and welded with hard alloy on the guide rib to ensure the flexible movement of the valve disc; 2. The sealing surface of the valve disc and valve seat is made of cobalt based hard alloy plasma spray welding, which has high hardness, e1
-
Floating soft seal electric ball valve
Q941F PN16~PN63 floating soft seal electric ball valve: electric drive, flange connection form, floating ball straight through type, sealing form adopts soft seal, valve seat sealing surface material is fluoroplastic, nominal pressure PN16~PN63, nominal size DN15~DN200, applicable temperature -28~300 ℃, valve body material is carbon steel or stainl1