30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
J11Y/J61Y forged steel globe valve
Brief introduction: Because the valve stem opening or closing stroke is relatively short, and has a very reliable cut-off function, and because the change of valve seat opening is in direct proportion to the stroke of valve disc, it is very suitable for flow regulation. Therefore, this type of valve is very suitable for cutting off or regulating an1
-
BZ41H insulated gate valve
Overview of BZ41H insulated gate valve: The insulated gate valve is mainly used in petroleum, chemical, metallurgical, pharmaceutical and other systems. The jacket of the valve is welded between the two flanges of the valve. The side and bottom of the valve are equipped with the connection port of the jacket. The jacket can freely flow through stea1
-
100D fixed water level valve
Product overview of 100D fixed water level valve: 100D fixed water level valve is a diaphragm valve that adjusts the height of the liquid level of the water tank and water tower. The fixed water level valve is controlled by a floating ball. When the liquid level reaches the set height, the valve transmits a signal to the water pump through the rele1
-
ZGB corrugated flame arrester
Overview of ZGB-1 corrugated flame arrestor: The ZGB-1 new corrugated oil storage tank flame arrestor is a new product designed by the Beijing Design Institute of China Petrochemical Corporation. It has been tested and qualified by the Tianjin Fire Science Research Institute of the Ministry of Public Security according to the GB5908-86 standard of 1
-
BQ41F/PPL Stainless Steel Insulation Ball Valve
Brief introduction of insulation valve structure: Insulation valves are welded with a metal jacket on the valve body. Steam, heat-conducting oil, cooling water, air-conditioning, etc. are injected into the metal jacket so that the medium of the valve body can meet the requirements under the conditions of normal temperature, heating, and cooling. Th1
-
CS45H inverted bucket steam trap
Introduction to CS45H inverted bucket steam trap: The inverted bucket trap is based on the principle of phase change, relying on the different thermodynamic principles of the flow rate and volume change of steam and condensate when passing through, so that different pressure differences are generated up and down the valve plate to drive the valve p1
-
CS19H Disc Type Steam Traps
Brief introduction of disc type steam trap: It is based on the Berlier's thermodynamic principle, which uses the different thermodynamic characteristics of steam and condensed water to cause dynamic and static pressure changes in kinetic energy and potential energy. The upper and lower pressure difference of the valve plate of the action member is 1
-
Nitrogen sealing device
Overview of nitrogen sealing device: The nitrogen sealing device is mainly used for the constant control of the nitrogen pressure at the top of the storage tank to protect the materials in the tank from being nitridated and the safety of the storage tank. The nitrogen sealing device is composed of two parts: ZZDQ quick relief valve and ZZV micro-pr1
-
ZBSF stainless steel flange solenoid valve
Overview of ZBSF stainless steel flange solenoid valve: The ZBSF stainless steel flange solenoid valve is an actuator used in an industrial process automation control system. It can automatically open or close after receiving an electric control signal to realize the on-off or flow adjustment control of the fluid in the pipeline. This series of sol1