30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Single seat unbalanced low-temperature regulating valve
Equipped with ZM10 type multi spring high-strength actuator. The actuator adopts a modular design, which can facilitate the replacement of positive and negative action forms on site, and effectively protect the spring from corrosion, thereby extending the service life of the actuator and facilitating user use. The combination of the actuator and th1
-
HH49X Butterfly Check Valve
The HH49X micro resistance slow closing butterfly check valve is mainly used in the supply and drainage pipelines of clean water, source water, sewage, seawater, and other media. It is installed at the outlet of the water pump to cut off the backflow of the media and eliminate atomic energy damaging water hammer, protecting the safe operation of th1
-
Ultra low temperature butterfly valve
The valve body adopts integral casting technology, with a compact structure, small volume, and light weight; The sealing ring design is novel, concise, and has strong interchangeability; The unique three eccentric structure greatly reduces the operating torque; Low flow resistance, high rated flow coefficient, approximately 3 times that of single s1
-
Grooved rising stem gate valve
The groove type (clamp) connecting valve is a series of new connecting valves designed and manufactured by introducing advanced products from the United States and Germany. It has the advantages of fast, simple, safe, reliable installation, unrestricted installation site, and easy maintenance of pipelines and valves. Widely used in water supply and1
-
L-type diaphragm metering pump
The DJ-L series is a mechanical diaphragm metering pump driven by an electric motor, suitable for precise fluid metering in low pressure situations. There are multiple material pump heads available for selection. Due to its high measurement accuracy, stable performance, and high usage requirements, it is widely used in sewage treatment, food additi1
-
Manual flange butterfly valve
Each soft sealing butterfly valve is suitable for regulating flow and intercepting medium on water supply and drainage, gas pipelines, such as food, medicine, chemical, petroleum, power, metallurgy, urban construction, light textile, paper, etc., with a temperature of ≤ 200 ℃ (depending on the sealing components) and a nominal pressure of ≤ 1.6MPa.1
-
Water type bottom valve
SSDF-1 water mounted bottom valve 1、 Overview Each water pump needs to be equipped with a bottom valve, which is usually installed below the water surface, while the above water bottom valve is installed above the water surface. It is a replacement product of the old bottom valve and is an ideal water diversion equipment and can also replace vacuum1
-
Flow and pressure regulating valve
The structure of the piston type electric flow and pressure regulating valve is: the valve body of the piston type electric flow and pressure regulating valve is divided into inner and outer layers, and the medium flows in the valve chamber between the inner and outer layers of the valve body. When the valve is running, the electric actuator receiv1
-
Wafer type butterfly valve
Designed based on the principle of three-dimensional eccentricity, the valve seat adopts a multi-level structure compatible with hard and soft sealing, with exquisite processing and advanced technology. This product consists of main components such as valve body, butterfly plate, multi-level valve seat, valve stem, transmission mechanism, etc.
-
Brass water pipe gate valve
Gate valve refers to a valve whose opening and closing body (valve plate) is driven by the valve stem to lift the sealing surface of the valve seat, which can connect or cut off the passage of fluid. When the valve is partially opened, eddy currents are generated on the back of the gate, which can easily cause erosion and vibration of the gate, and1
-
J744X Hydraulic Angle Mud Valve
Overview of piston type quick opening mud discharge valve: The J744X hydraulic piston type quick open sludge valve and pneumatic piston type quick open sludge valve are generally installed outside the bottom wall of various water treatment plants or industrial sedimentation tanks to remove sediment and dirt from the sedimentation tank.
-
Wafer type butterfly valve
Designed based on the principle of three-dimensional eccentricity, the valve seat adopts a multi-level structure compatible with hard and soft sealing, with exquisite processing and advanced technology. This product consists of main components such as valve body, butterfly plate, multi-level valve seat, valve stem, transmission mechanism, etc.