30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
Worm gear groove signal butterfly valve
The worm gear groove signal butterfly valve is driven by a worm gear, and the cam rotates to press or release the contact on the signal device according to the predetermined position. The corresponding "on" and "off" electrical signals are output to display the opening and closing status of the butterfly valve. It can be widely used for cutting or 1
-
JM744X quick opening mud discharge valve
The quick opening sludge discharge valve is usually installed on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom. The valve is divided into two chambers by a reinforced nylon rubber diaphragm. It is operated by a pneumatic or hydraulic source as the actuator, and is controlled by an electric or man1
-
Flange connected Y-shaped filter
Y-type filters are usually installed at the inlet end of hydraulic control valves and other equipment to prevent particle impurities from entering the channel, causing blockage and preventing normal use of the equipment. They are essential filtering equipment for precision mechanical products that are prone to blockage. The Y-shaped filter has a si1
-
Pneumatic diaphragm valve
This series of diaphragm valves can be applied to different fluid medium pipelines at different temperatures based on different coating materials, serving as an opening and closing mechanism to control medium flow.
-
PZ673 Pneumatic Knife Gate Valve
The PZ673H pneumatic knife gate valve series products are widely used in various industrial fields, especially in mining and steel industries - used for coal, filter slurry, purification devices - used for wastewater, mud, dirt, and clarified water with suspended solids, paper industry - used for any concentration of paper slurry, material water mi1
-
Waterproof solenoid valve
Electromagnetic valve is an industrial equipment controlled by electromagnetic, which is an automation basic component used to control fluids. It belongs to the actuator and is not limited to hydraulic or pneumatic systems. It is used in industrial control system to adjust the direction, flow, speed and other parameters of medium. The solenoid valv1
-
Forged steel check valve
The forged steel check valve series products are used as devices to prevent reverse flow of media on industrial pipelines, and are widely used in industries such as chemical, metallurgical, petroleum, pharmaceutical, food, beverage, and environmental protection.
-
Stainless steel plug valve
Plug valves are widely used in oilfield production, transportation, and refining equipment, as well as in petrochemical, chemical, gas, natural gas, liquefied petroleum gas, HVAC, and general industries. Plug valves can be divided into four types according to their structural form: tight set plug valves, self sealing plug valves, plug valves, and o1
-
High pressure micro resistance slow closing check valve
The micro resistance slow closing check valve is mainly suitable for water supply and drainage pipelines. It is installed at the outlet of the water pump to prevent medium backflow and eliminate destructive water hammer, and effectively reduce the pressure of valve closing water hammer, ensuring the safe operation of the pipeline network. It has th1
-
Electric diaphragm valve
The most prominent feature is that the diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, preventing the valve stem, valve disc, and other parts located above the diaphragm from medium corrosion, eliminating the packing sealing structure, and avoiding medium leakage. 1. Diaphragms made of so1
-
Spring slightly opened closed safety valve
A41H type are used for the equipment and pipeline of the petroleum gas, air, water etcmedium what the working temperature are less than 300C A41Y-P/R type are used for theequipment and pipeline of the quality with corrode medium what the working temperature areess than 200C Take for extra pressure devices. Flange connecting dimensions o1
-
5D elbowA234-WPB
Bend pipes are bent using a complete set of bending molds, which are divided into two processes: cold bending and hot pushing. Regardless of the type of machine equipment and pipeline, most of them use bent pipes, mainly for oil, gas, infusion, and other purposes. Classification: According to the production method, it can be divided into pushing, p1