30 years focus on high quality custom valves products. Our product mainly include gate valve,ball valve,globe valve,check valve,butterfly valve,Y-Strainer,control valve,foot valve,air valve,etc.
-
ZBSF stainless steel flange solenoid valve
Overview of ZBSF stainless steel flange solenoid valve: The ZBSF stainless steel flange solenoid valve is an actuator used in an industrial process automation control system. It can automatically open or close after receiving an electric control signal to realize the on-off or flow adjustment control of the fluid in the pipeline. This series of sol1
-
900X emergency shut off valve
Brief introduction of 900X emergency shut off valve: 900X emergency shut-off valve is a kind of valve which is used in the water supply system of fire fighting water and domestic water in parallel, and is used in the direction of water supply by users. In case of fire, a large amount of water is urgently needed for fire fighting. Domestic water sho1
-
CS49H disc flange steam trap
Brief introduction of CS49H/CS49W disc flange steam trap: Disc type steam trap is based on the principle of Bernoulli's thermal power, which uses the different characteristics of steam and condensate to cause the change of kinetic energy and potential static pressure. Make the pressure difference between the upper and lower parts of the actuator va1
-
CS17H Bimetallic Disc Trap Valve
Brief introduction of CS17H bimetallic trap: The CS17H bimetallic steam trap is driven by a bimetallic temperature sensing element to drive the valve core to open and close the valve. When the device is just started, low-temperature condensed water appears in the pipeline, the bimetal is flat, and the valve core is in the open position under the el1
-
D363H/W Butt Welding Hard Seal Butterfly Valve
Overview of D363H/W Butt Welding Hard Seal Butterfly Valve: D363H butt-welding hard-sealed butterfly valve is widely used in metallurgy, electric power, petrochemical, water supply and drainage, municipal construction and other industrial pipelines with medium temperature ≤ 425℃. It adopts precision J-shaped elastic sealing ring and three-eccentric1
-
Power station safety valve SFA48Y
Product introduction: SFA48Y high temperature and high pressure safety valve, power station safety valve: high temperature and high pressure spring safety valve is suitable for working temperature "C cast steel type" ≤425℃; "I chromium molybdenum steel type" ≤500℃; "V chromium molybdenum steel type" ≤550℃ Used as an overpressure protection device o1
-
CS41H free float trap
Overview of CS41H free float trap: The free-floating ball steam trap is one of the most advanced steam traps in China, and the product technical quality and manufacturing process have reached the level of similar products in the world. Due to the high precision of the floating ball, the sealing performance of the trap can be ensured, and the entire1
-
PZ43H Plum Blossom Knife Gate Valve
Brief introduction of PZ43H plum blossom knife gate valve: The opening and closing part of the knife gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate has two sealing surfaces. Th1
-
A42F liquefied gas safety valve
Brief introduction of A42F liquefied gas safety valve: The liquefied petroleum gas safety valve is suitable for the liquid phase outlet pipe of the liquefied petroleum gas whose working temperature is -40~80℃. When the pressure difference between the inlet and outlet is 0.5MPa, the liquefied petroleum gas can automatically flow back into the tank.1